Cypress’s CYRF6936 2.4-GHz wireless solution
The Cypress Semiconductor CYRF6936
2.4GHz low-power radio provides a
complete WirelessUSB™ SPI to antenna
wireless modems.
The CYRF6936 is a second-generation member
of Cypress’s WirelessUSB radio System-on-Chip
(SoC) family supporting 98 discrete 1MHz
channels. It is interoperable with the first-generation
CYWUSB69xx devices, and adds
features including increased operating-voltage
range, reduced supply current, higher data-rate
options, and reduced crystal start-up,
synthesizer-settling and link-turnaround times.
The SoC contains a 2.4GHz, 1Mbps GFSK radio
transceiver, packet-data buffering, packet framer,
Direct Sequence Spread Spectrum (DSSS)
baseband controller, Received Signal Strength
Indication (RSSI), and SPI interface for data transfer
and device configuration.
The baseband performs DSSS spreading/despreading,
Start Of Packet (SOP) and End Of Packet
(EOP) detection, as well as CRC16 generation and
checking. The baseband may also be configured to
automatically transmit acknowledge handshake
packets whenever a valid packet is received. When
in receive mode, with packet framing enabled, the
device is always ready to receive data transmitted
at any of the supported bit rates, enabling the
implementation of mixed-rate systems in which
different devices use different data rates.
The CYRF6936 has a Power Management Unit
(PMU) allowing direct connection of the device to
any battery voltage in the 1.8V to 3.6V range. The
PMU conditions the battery voltage to provide the
supply voltages required and can also supply
external devices.
FEATURES
 |
- 21mA operating current
(transmit @ –5dBm)
- +4dBm transmit power
- -97dBm receiver sensitivity
- <1µA sleep current
- 250kbit/s DSSS data rate
|
 |
|
|
APPLICATIONS
 |
- Remote controls
- Toys
- Home automation
- Automatic meter readers
- Personal health and entertainment
|
 |
|
|