STMicroelectronics : New reference design demonstrates a wireless STEVAL-IDS002V1 sensor node powered by light

pg14_ST_1_thumb

With the STEVAL-IDS002V1, STMicroelectronics has created a complete, fully configurable reference design for a wireless sensor node powered by a Photovoltaic (PV) module. The STEVAL-IDS002V1 is made up of a transmitter board which contains the SPIRIT1, an ST transceiver which operates at frequency ranges below 1GHz, and an STM32L151 low-power microcontroller which controls the configuration […]

STMicroelectronics : ST25TA02K-P – Tag IC with on-board memory provides NFC bridge to a host MCU

pg19_ST_1_thumb

STMicroelectronics’ ST25TA02K-P is a dynamic NFC/RFID tag IC with an embedded 2kbit EEPROM which enables it to operate as an NFC or RFID bridge between a host MCU and an external device. The ST25TA02K-P, which supports the NFC Forum’s NDEF tag application for type 4 tags, conforms to the ISO/IEC 14443 Type A protocol for […]

STMicroelectronics : Complete proximity-sensing module VL6180X includes IR emitter and sensors in a single package

pg16_ST_1_thumb

STMicroelectronics’ VL6180X is an innovative proximity and Ambient Light Sensing (ALS) module which takes an unusual approach to the measurement of distance from a reflective surface. It is based on ST’s patented FlightSense™ technology. This enables absolute distance to be measured independent of the target’s reflectance. Unlike conventional Infra-Red (IR) ALS systems, which estimate distance […]

STMicroelectronics – SPWF01S intelligent Wi-Fi module includes option for integrated TCP/IP stack

pg13_ST_1_thumb

The SPWF01S intelligent Wi-Fi® module from STMicroelectronics is a stand-alone IEEE 802.11b/g/n solution which enables designers to quickly integrate wireless Internet connectivity into existing or new products for the Internet of Things. The module consists of a single-chip 802.11 transceiver with an integrated power amplifier, and an STM32 microcontroller with an extensive general-purpose I/O suite. […]

STMicroelectroncis : Power manager regulates harvested energy to charge any battery – SPV1050

pg20_ST_1_thumb

The SPV1050 from STMicroelectronics is a highly efficient Power-Management Unit (PMU) for photovoltaic and thermoelectric generation energy-harvesting systems. Highly integrated, it implements the Maximum Power Point Tracking (MPPT) function for solar and thermal differential power generation, and includes the switching elements of a boost and a buck-boost converter. The SPV1050 device can charge any battery, […]