STMicroelectronics – BLDC motor-control system combines gate drivers and MCU in a single package

pg15_ST_thumb

The STSPIN32F0 from STMicroelectronics is a system-in-package which provides an integrated solution suitable for driving three-phase Brushless DC (BLDC) motors using various driving modes. It includes a triple half-bridge gate driver for MOSFETs or IGBTs, an LDO to supply the gate drivers, an STM32F031C6 32-bit microcontroller, and an internal DC-DC buck converter which provides a […]

STMicroelectronics – Demo kit for NFC interface IC includes 32-bit MCU-based motherboard

pg12_ST_thumb

The ST25DV-DISCOVERY from STMicroelectronics is a demonstration kit showing the capabilities of the ST25DV series of NFC interface ICs. The kit consists of an NFC daughtercard containing a ST25DV04K and a Class 5 antenna, and a motherboard featuring an STM32 microcontroller. The ST25DV chip has both a contactless NFC and a wired I2C interface as […]

STMicroelectronics – Eval board implements single high-side driver design

pg13_ST_thumb

STMicroelectronics’ STEVAL- IFP028V1 is an evaluation board which implements a high-side driver design based on ST’s IPS160H, a high-side switch intended for use in safety systems and industrial I/O modules. The STEVAL-IFP028V1 meets safety requirements for galvanic isolation between the user interface and the power interface, providing optical isolation through two optocouplers for forward signals […]

STMicroelectronics – IO-Link transceiver for PLCs and industrial communications

pg14_ST_thumb

The L6362A from STMicroelectronics is an IO-Link and serial I/O- mode transceiver for PHY2 three-wire connections which supports the COM1 4.8kbaud, COM2 38.4kbaud and COM3 230.4kbaud communication modes. The output stage can be configured as high-side, low-side or push-pull, and can drive resistive, capacitive and inductive loads. It is intended to be connected to a […]

STMicroelectronics – Rugged 600V IGBT module for high-voltage motor drives

pg15_ST_STG

The 600V STGIB30M60TS-L from STMicroelectronics is the second series of its Small Low-Loss Intelligent Moulded Module (SLLIMMTM) system-in-package, which provides a complete inverter power stage for high-voltage motor drives. It combines new ST control ICs, a low-side and a high-side driver, with improved trench gate field-stop IGBTs that can withstand short-circuit conditions. It is ideal […]

STMicroelectronics – STM32 MCU interface to IBM Watson IoT supports predictive maintenance

pg14_IDT_thumb

STMicroelectronics has introduced a function pack which provides a ready-made interface between sensors mounted on industrial equipment and the IBM® Watson IoTTM cloud application for predictive maintenance and condition monitoring. The FP-CLD-WATSON1 function pack can connect any IoT node based on an STM32 Nucleo microcontroller board to the IBM Watson IoT application, transmit sensor data […]